The pressure injection pump PGP 30/40 LC is an pneumatic driven 2- component gearpump, suitable for the work under mining and civil engineering conditions.

It consists of a powerfull 8kW pneumatic drive and two mining approved high capacity gearpumps.

With its high constant flowrate of 40 l/min at a pressure up to 40 bar, it is the perfect pump for all injections works where you must be  able to pumpe a lot material in a  short time frame. Of course this pump can be uses with all common Polyurethan injection resins.

With additional gearpumps, that can be purchased optional, it is also possible to use  this pump with injection resins which need a mixing ratio of 2:1 or 4:1.

Because of its low price this pump is not equipped with overflow valves or a pressure switch at the pressure outlet.

Application: The PGP 30/40 LC is a powerfull gearpump for the injection of 2- component injection Materials, mainly used in the mining and civil engineering industry. It is meant for the use with common 2- component Polyurethan injection Materials with a mix ratio of 1:1. Due to the high flowrate generated by this pump it is predestined for all jobs where you have to pump much material in a short period of time.

Technical Data:
Air drive pressure1-5 bar/14,5-72psiConnections
Max. operating pressure120 bar / 1740 psiAir connectionRD 38 x 1/8“
Max. pneumatic drive power8kW at 1000rpmSuction connectionRD 38 x 1/8“
Chamber volume of each gearpump22 cm³ / 1,3 inch³Pressure outletSteck-O DN 10
Max. operating temperature60°CWeightca. 125 kg
LiquidsPolyurethan Silicate resin
Max. flow rateca. 40 l/min at max. 40 bar / 580 psi
DimensionsHeight500 mm
Width500 mm
Length1200 mm


Inquiry Form

WhatsApp chat