On many job sites you have to fulfill the requirement of a complete documentation of the injectionwork.
For that purpose we have build the Flow Meas- urement Unit 65/160.
This is a two channel measurement unit which records flow and pressure of both components of the injection material.
It also gives you the possibility to shutdown your pump if a certain pressure or flow was achieved (additional accessories required).
The recorded values get stored in the internal memory of the device and can be read out onto a USB flash device as an Excel File.
Application: You place the PFMU 65/160 between your injection pump and your mixing unit, suitable HD- hoses. After that you have the possibility to only display the measured values or to record them on the device.
Technical Data: | |||
Connectors | |||
max. operating pressure | 160 bar / 2320 psi | Inlet: | Steck-O DN 10 |
Electr. connection | 230V / 50Hz | Outlet: | Steck-O DN 10 |
max. temperature: | 60°C | Weight: | 70 kg |
Media: | Polyurethan Silicate resin | ||
max. flow rate: | 130 l/min | ||
Dimensions: | Height: | 660 mm | |
Width: | 410 mm | ||
Lenght: | 900 mm |