Description

The single component pressure injection pump Type GX35  V  is  a  pneumatically  driven, single acting piston pump that operates after the pressure intensification principle. The  area  ratio of drive pressure to pressure piston ring area yields the pressure ratio which is 38:1 in type GX35 V pumps.

The pump consists of a pneumatically actuated drive part and a high-pressure part. Drive part and high-pressure part are linked with a piston rod. Thus, the drive and high-pressure parts are isol- ated and it is prevented that pump medium gets into the pneumatic drive part in case of leakages in the high-pressure sealing. The piston rods are of high-tensile stainless steel and boast long ser- vice lives.

The  valve  seats  are  of  tempered  steel  and  the sealings of wear resistant PTFE.

Application: The GX35 V pump is a compact and lightweight Injection pump with a high flow rate, mounted in a protection frame.

Technical Data:
Air drive pressure1-9 bar / 14,5-130 psiConnections
Max. operating pressure at 5 bar inlet pressure190 bar / 2755 psiAir connectionG ¾“
Pressure ratio38:1Suction connection1“ NPT
Stroke volume per double stroke120 cm³ / 7,32 inch³Pressure outlet3/8“ NPT
Max. operating temperature60°CWeightca. 35 kg
LiquidsPolyurethan Silicate resin Water
Max. flow rateca. 25 l/min on free outlet
For information of flow rates at the different pressure stages please refer to the performance graph.
Air piston diameter160 mm
High-pressure piston diameter36 mm
DimensionsHeight244 mm
Width632 mm
Length237 mm

Inquiry Form




WhatsApp chat