It allows to mix and pump cement mortars with a maximum grain size of 3 mm, continuously and without problems. It is driven by an electric or a hydraulic motor. Dry material is introduced into the pump, then it passes through a worm conveyor to a mixing chamber, where it is mixed with water. Ready mixture flows to stator and rotor and it is pumped with 80 bar maximum pressure and 100 m maximum distance. The flow rate depends on the installed pump body (from MP2 -240 l/h to MP13 -4500 l/h).

Cement grout pump may be used for:

• Passive and active anchors
• Self-drilling anchors
• Tunneling
• Micropiles
• Backfilling

It may also be used for cement spraying if equipped with an additional air compressor.

The Cement grout pump user is immediately aware of any possible problems thanks to control panel indicating lights, which helps to avoid time wasting.

In case of any breakdowns, the machine stops automatically and does not start until the problem is solved. The motor reverse function of Cement grout pump allows unclogging pump body in case of blockage.

We increased a charging hopper capacity and changed the wheels, appropriate for muddy terrains. The digital water liter counter indicates the water quantity and facilitate the control of grout quality.

Technical Specification